OPC DA – BACnet MSTP Gateway

  • home
  • /
  • OPC DA – BACnet MSTP Gateway

OPC DA – BACnet MSTP Gateway Solutions (PG-102-125) a highly powerful, superior, completely configurable and productive Building & Industrial Automation gateway for integrators to effortlessly interface devices to networks in commercial buildings and industrial plants.

PG-102-125 Gateway supports BACnet MSTP and OPC DA (client only) protocols.

This gateway can be configured to be:

OPC DA Client and BACnet MSTP Client: Hence this gateway will connect to a 3rd party OPC DA server and read or write tags. On the other hand it will be a BACnet client and it can read or write data from a BACnet server.

This mode is useful when you have BACnet MSTP based server devices and you need a solution to read values from them and write them to your OPC server. Or you want to constantly read OPC DA tags and write these values on a BACnet server device.

OPC DA Client and BACnet MSTP server: This is probably the most common mode of operation. And in this mode the gateway is configured to read OPC DA tags and publish them on BACnet MSTP as a server.

OPC DA - BACnet MSTP Gateway Solutions

So a 3rd party building automation/management system (BAS/BMS) can now read all this data on BACnet (and hence have access to the OPC DA data via the gateway). It is also possible to write OPC DA tags from the BACnet side. So the BAS/BMS system can set values on the OPC DA server via the gateway.

The Gateway has benefitted system integrators worldwide with its powerful line of functions. Additionally, the gateway runs the same protocol conversion software on a productive and cost-efficient platform backed by the experience, engineering expertise and technically proven support that integrators have come to expect from this Gateway.

Features of OPC DA – BACnet MSTP Gateway Solutions

Ability to interface up to 1000 points in the base version (upgrades to higher points can be purchased)

DIN rail mount

BACnet COV support for fast data communication while reducing the traffic over a BACnet network

 

Application scenarios:

This gateway is extensively used to integrate lift/elevator/escalator systems that support OPC DA with a BMS/BAS system on BACnet MSTP.

There are some Fire alarm systems that have an OPC DA interface. And you can monitor your fire system from your BACnet based BMS/BAS using this gateway.

 

Contact






    Become a Shubham Dealer

      Company Registration Certificate