Modbus TCP – Agilent Gateway (PG-101-142) has highly powerful and superior processor which is completely configurable and productive Building & Industrial Automation gateway for integrators to effortlessly interface devices to networks in commercial buildings and industrial plants.
PG-101-142 Gateway supports Modbus TCP and Agilent protocols. It is a Bi-directional Converter that can be configured as a Client and/or a Server on either protocol interface.
When configured as an Agilent client, the Gateway can read data from your Agilent devices and serve the data on Modbus TCP. Also, it can write commands sent from the Modbus TCP side to the Agilent devices.
When configured as a Modbus TCP client, the Gateway can read data from your Modbus TCP devices and serve it as Agilent data. Also, it can write commands sent from the Agilent side to the Modbus TCP devices.
The Gateway can be configured to behave as a server on both Agilent and Modbus TCP interfaces. This mode is useful when data exchange is required between an Agilent client (for e.g. SCADA) and a Modbus TCP client (for e.g. a Building Management System).
The Gateway can be configured to behave as a client on both Agilent and Modbus TCP interfaces.
The Gateway has benefitted system integrators worldwide with its powerful line of functions. Additionally, the gateway runs the same protocol conversion software on a productive and cost-efficient platform backed by the experience, engineering expertise and technically proven support that integrators have come to expect from this Gateway.
Features of Modbus TCP – Agilent Gateway Converter
Ability to interface up to 1000 points
DIN rail mount
In-built one wire Serial Port