Modbus RTU – OPC DA/UA Gateway Solution has highly powerful and superior processor which is completely configurable and productive Building & Industrial Automation gateway for integrators to effortlessly interface devices to networks in commercial buildings and industrial plants.
This Gateway supports Modbus RTU and OPC DA/UA protocols. It is a Bi-directional Converter that can be configured as a Client and/or a Server on either protocol interface.
When configured as an OPC DA/UA client, the Gateway can read data from your OPC DA/UA devices and serve the data on Modbus RTU. Also, it can write commands sent from the Modbus RTU side to the OPC DA/UA devices.
When configured as a Modbus RTU client, the Gateway can read data from your Modbus RTU devices and serve it as OPC DA/UA data. Also, it can write commands sent from the OPC DA/UA side to the Modbus RTU devices.
The Gateway can be configured to behave as a server on both OPC DA/UA and Modbus RTU interfaces. This mode is useful when data exchange is required between an OPC DA/UA client (for e.g. SCADA) and a Modbus RTU client (for e.g. a Building Management System).
The Gateway can be configured to behave as a client on both OPC DA/UA and Modbus RTU interfaces.
The Gateway has benefitted system integrators worldwide with its powerful line of functions. Additionally, the gateway runs the same protocol conversion software on a productive and cost-efficient platform backed by the experience, engineering expertise and technically proven support that integrators have come to expect from this Gateway.
Features of Modbus RTU – OPC DA/UA Gateway Solution
Ability to interface up to 1000 points
DIN rail mount
In-built one wire Serial Port